Daily maintenance of Comprehensive Test Of Transformer is essential to ensure its long-term stable operation and test accuracy. The following are detailed steps and precautions for daily maintenance of Comprehensive Test Of Transformer:
1. Environmental inspection
Temperature and humidity: Ensure that the temperature of the tester is between 5℃~40℃ and the relative humidity does not exceed 80% to prevent the equipment from being damaged by overheating or overhumidity.
Cleanliness: Keep the tester and the surrounding environment clean to prevent dust and debris from entering the equipment and affecting the performance of the equipment.
2. Equipment appearance inspection
Check the equipment casing: Ensure that the equipment casing is not damaged or deformed, and all components are firmly connected.
Check the display: Check whether the display is clear, without scratches or damage, to ensure that the test data can be displayed normally.
3. Connection line inspection
Check the power line: Ensure that the power line is firmly connected, without damage or aging, to ensure that the equipment can be powered normally.
Check the test line: Check whether the test line is connected correctly, without looseness or short circuit, to ensure the accuracy of the test results.
4. Cleaning and Maintenance
Regular cleaning: Use a clean soft cloth to wipe the surface of the device to remove dust and oil. Be careful not to use corrosive cleaning agents to avoid damaging the device.
Fan cleaning: Pay special attention to the fan on the right side of the device to ensure that it is well ventilated and heat-dissipated. Clean the dust and debris on the fan regularly to avoid affecting the heat dissipation effect.
5. Software Update and Backup
Software Update: Pay attention to the update information of the device software and upgrade the software in time to obtain better performance and functions.
Data Backup: Back up the test data regularly to prevent data loss.
6. Storage and Preservation
Long-term non-use: If the device is not used for a long time, it should be stored in a dry, ventilated, non-corrosive gas environment to avoid moisture and damage to the device.
Avoid vibration and shock: During storage and transportation, the device should be protected from strong vibration and shock to avoid damage to the device.
7. Precautions
Avoid placing heavy objects on the device: to avoid crushing the device or affecting the performance of the device.
Avoid using corrosive substances such as strong acids and alkalis: to avoid damaging the device or affecting the test results.
Through the above daily maintenance measures, the long-term stable operation and test accuracy of Comprehensive Test Of Transformer can be ensured.
